Shower Upgrade 101 - Best Practices For New Unit Installation

Request Estimate



We've discovered this great article about Simple ways to Install a Shower Cubicle on Your Own below on the internet and reckoned it made good sense to share it with you on this page.


How to Build a Shower Enclosure for Your DIY Bathroom
An effective shower installment calls for careful planning and a lot of work. In many cases, you will certainly require to do 3 sorts of jobs: mounting wall surfaces, mounting the plumbing, and also ending up wall surfaces.

Prep work


Firstly, you must decide on the type of shower that you wish to install. It is essential to determine whether the selected shower is capable of dealing with specific systems and can control a secure degree of water via the central heating boiler. A lot of shower systems nowadays are created to be versatile to different water stress (such as saved warm water and also cool keys).
It is likewise essential to consider the water pressure and also the preparation of the piping and also drain for the shower

Different Types of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower device can be attached to the bathroom tap as per your requirement, and also the water temperature level can be changed through the taps. Push-on mixers are cheap and also exceptionally basic to set up. However, although the tube link is basic, it is easily displaced. Furthermore, it is troublesome to readjust the temperature level.

  • Bath/Shower Mixer: The hose pipe and spray of this sort of shower are integrated with a bath mixer faucet, as well as the temperature can be adjusted via the bath taps. It is a really affordable option and also no additional plumbing is involved. Nonetheless, the bath/shower mixers likewise struggle with inconvenient temperature level control options.

  • Manual Mixer: The tube as well as spray of a manual mixer shower device are a part of the wall surface system and the cold and hot water supplies are attached to a single shutoff The temperature level and stress of the water are controlled via either one or a variety of handles (in much more pricey showers). Although temperature control is a lot easier in hands-on mixer kinds, they are a lot more pricey than the previously stated mixers. They likewise call for extra plumbing of cold and hot supply of water pipelines.

  • Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall system and the hot and cold water products are connected to a solitary valve right here also. It is total with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from ending up being also hot. Among the biggest advantages of a thermostatic mixer shower kind includes practical temperature level control. However, it is one of the most pricey of the different mixer choices.

  • Power Shower: A power shower is a solitary unit consisting of an effective electric pump that can modifying both the water pressure as well as temperature level. This type of shower can be fitted if there is supply of water from a cold water tank and also a hot water cylinder. A power shower makes the change of both stress as well as temperature level very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

  • Electric Shower: An electric shower is plumbed right into a keys cold water supply and it heats up the water electrically. It is very important to keep in mind that for this shower type to be installed, the mains stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level and also pressure to be adjusted through a handle. Versions with temperature level stabilisers are much better as they remain unaffected by other taps somewhere else in operation within the household. A major drawback of electric showers is that the control knob only enables the choice of heats at much less stress, or reduced temperature levels at a better pressure. This is problematic in the winter season when the spray is frequently weak and the mains water is colder. However, this problem is tackled in some models which are available with a winter/summer setting.


  • Technique


    Depending upon the kind of shower you want to set up, the shower head should either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it must have a check valve.
    Before beginning, it is suggested to note the placements of the shower head and also control, and also to prepare the pipe-work included. Furthermore, the drain system to remove the waste water will require to be intended. Both placements of the cord path as well as the shower switch will additionally require to be taken into consideration if an instant or electric shower unit is being mounted.
    Make use of the direction guide offered with the shower unit to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is essential to cut off the water. In order to shield the pipelines, they ought to be given a water-proof covering as well as likewise fitted with isolating shutoffs. The pipelines can then be hidden right into the wall and smudged over to neaten the total appearance.
    Fit the base tray, shower head, as well as fittings.
    Attach the primary shower control to the pipes that will certainly be providing the water (This may call for a women screw thread adapter).
    Reconnect the water as well as test the pipelines for any type of leaks, as some might need tightening.
    If you are mounting an electrical shower, remember to turn off the electrical power supply prior to making any type of electrical links. When these links have actually been made (there should be advice within the instruction manual), the power supply can be switched back on.

    Changing Water Pressure to Match Your Shower


    The cold water reservoir can be raised to a higher elevation (in some cases as little as 150mm (6inches)) by fitting a solid wooden assistance below it - perhaps composed of struts and also blockboards. If you select this option, the primary and also distribution pipelines will additionally have to be elevated to meet the brand-new height of the tank.
    Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be attached into the power supply in order to operate.

    Piping as well as Water drainage


    It is best to use 15mm diameter supply pipelines, and make the runs to the shower as short and also straight as feasible so as to preserve optimal stress and minimise warmth loss. Additionally, by reducing making use of elbows for pipe corners, you can lower the resistance in the circulation of the water supply. You can achieve this by flexing the pipelines rather.

    Most Typical Blunders


  • Going against or ignoring regional code limitations.

  • Making use of pipes that are too little.

  • Affixing copper to galvanized without utilizing a brass or dielectric suitable in between the two.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not mounting an air void filling for fixtures.

  • Reducing supply stub outs also brief to install the shutoff valves onto after the ended up wall is in location.

  • Not effectively straightening tubing into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will trigger a leak.).

  • When transforming the water back on in your house, constantly run the outdoors hose valve or flush your bathrooms to bleed dirt as well as air from the lines. This debris can trigger problems in your sink faucets and other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a Freestanding Shower Unit

    I'm certainly very intrigued by How to Build a Shower Enclosure for Your DIY Bathroom and I'm hoping you liked the new piece. Sharing is good. Helping others is fun. Thanks so much for going through it.




    Schedule Service Now


    Leave a Reply

    Your email address will not be published. Required fields are marked *